Countdown Timer Mode - Timex COMMAND ENCOUNTER User Manual

•
Stopwatch operation when started will continue to function even if you change to another
mode. Maximum run time for stopwatch is 23 hours / 59 minutes / 59 seconds.

Countdown Timer Mode

To enter Countdown Timer mode:
•
Press (B) until TMR appears (Fig. 22).
Fig. 22
To configure countdown time:
•
Press (C) until 'SET' flashes and then disappears and hour digits starts to flash (Fig. 23).
Fig. 23
•
Press (B) to scroll through Hour / Minute / Second. Flashing value indicates item to be
set (Fig. 24).
Fig. 24
•
Press (C) to increase time or press (A) to decrease time.
•
Press (D) to exit countdown timer setting mode.
To use countdown timer:
•
Once desired countdown time has been set press (C) to start timer.
•
Press (C) to stop timer if needed. Timer can be reactivated by pressing (C) again.
•
When timer reaches '0:00:00' press any button to turn off.
•
Press (D) to reset timer.
Page | 8