Shark RV860WVC Ion Quick Start Manual

Please be sure to read the enclosed Shark
CONGRATULATIONS ON YOUR NEW SHARK ION
Getting Started is Easy – Follow These Simple Steps To Get Cleaning
STEP 1

SET UP YOUR CHARGING DOCK

Place dock with its back against a wall
on a level surface, in an open, central
area that the robot can easily access.
Dock must be at least 3 feet away
from corners.
Plug dock into a power outlet.
STEP 3

CHARGE WITH THE DOCK

Handheld vacuum:
Insert handheld into the charging port on the
dock. Charging is complete when the light
on the handheld vacuum turns solid blue.
(Approximately 2.5 hours for full charge.)
Robot:
The Power switch
Place robot on dock.
must be ON to charge. Blue lights will blink
during charging, then illuminate steadily when
charging is complete. (Approximately 3 hours
for full charge.) When robot is fully charged,
press the Clean button to start.
No Charge Full Charge
STEP 5

GET THE FULL EXPERIENCE WITH THE APP

Full Charge Nearly Full Mid Charge Low Charge
ROBOT
Don't forget to register your cleaning system at registeryourshark.com
Please be sure to read the enclosed Shark Owner's Guide prior to using your unit.
®
For assistance, visit us online at sharkclean.com or contact us at 800-798-7398
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. BOTBOUNDARY and SHARK ION are trademarks of SharkNinja Operating LLC.
AMAZON, ALEXA, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and ANDROID are trademarks of Google LLC.
RV860WVC_QSG_E_F_REV_Mv2
® Owner's Guide prior to using your robot cleaning system.
3 ft.
3 ft.
5 ft.
With the Shark ION Robot app, you can easily schedule
cleanings or send your robot into action from anywhere.
Search "Shark ION Robot" in the app store, then download
onto your iPhone
• Tips, Tricks, and FAQs • Troubleshooting • Voice control
setup for the Google Assistant and Amazon Alexa
STEP 2
I

INSTALL THE SIDE BRUSHES

The 2 included side brushes snap onto
the square pegs on the bottom of the
robot. Align the hole in the brush over
until brush
the peg and press down
clicks into place.
STEP 4

PREP YOUR HOME FOR CLEANING

Remove robot-trapping obstacles such as loose
power cords, clothes, toys, and low-hanging
Use BotBoundary strips to block off furniture and
™
create no-go zones.
Robot Traps
or Android .
™ ™
ROBOT
™
drapes.
Robot Friendly
@sharkcleaning