Table of Contents
Advertisement
22
www.electrolux.com
10.8 The SensiCare System
load detection
After touching the Start/Pauza
button:
1. The SensiCare System starts
estimating the size of the load to
calculate the real programme
duration. During this phase the Time
Manager bars
time digits play a simple animation.
2. After about 15-20 minutes the Time
Manager bars disappear and new
cycle duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
10.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the button Start/Pauza
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pauza
again.
The washing programme continues.
10.10 Cancelling a running
programme
1. Press the button Zap./Vyp. to cancel
the programme and to deactivate the
appliance.
2. Press the button Zap./Vyp. again to
activate the appliance.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
placed below the
.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position.
2. Wait for 1 second. The display shows
Now, you can set a new washing
programme.
10.11 Opening the door -
Adding garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you cannot open
the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the button Start/Pauza
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pauza
button.
The programme or the delay start
continues.
10.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Start/Pauza
button goes off.
The door unlocks and the indicator
goes off.
1. Press the Zap./Vyp.
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
.
button to
Advertisement
Table of Contents
