Quick Start
Unpack, Inspect and Verify Box Contents
Figure 1-5
Jack Stand
Additional Tools Required
— 5/16, 8-in-lb torque wrench for instrument cable connections
— 2.0 mm hex wrench for attaching the baseplate to the V3050A
— 2.5 mm hex ball driver (or a 3/32 hex ball driver) for the security lock
— 1/4" wrench for 2.4 mm adapter
Shipping Problems
If the shipping materials are damaged or the contents of the container are
incomplete:
— Contact the nearest Keysight Technologies office.
— If you must return the frequency extender to Keysight Technologies, use the
V3050A SA Frequency Extender Getting Started Guide
Keep the shipping materials for the carrier's inspection.
original (or comparable) shipping materials. See
Frequency Extender for Service" on page
"Returning a V3050A SA
40.
13