Related Manuals for Keysight Technologies V3050A
Summary of Contents for Keysight Technologies V3050A
- Page 1 Keysight Technologies V3050A Signal Analyzer Frequency Extender Getting Started Guide...
- Page 2 Notices © Keysight Technologies, Inc. documentation. No additional THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE 2021 government requirements AGREEMENT WILL CONTROL. beyond those set forth in the No part of this manual may be EULA shall apply, except to the...
- Page 3 Documentation is updated periodically. For the latest information about these products, including instrument software upgrades, application information, and product information, browse to one of the following URLs, according to the name of your product: http://www.keysight.com/find/v3050A To receive the latest updates by email, subscribe to Keysight Email Updates at the following URL: http://www.keysight.com/find/MyKeysight Information on preventing analyzer damage can be found at: http://www.keysight.com/find/PreventingInstrumentRepair...
-
Page 5: Table Of Contents
Initial Inspection Standard Shipping Items Optional Accessories Additional Tools Required Shipping Problems Setup the Frequency Extender with the N9042B Signal Analyzer Using the V3050A with an N9042A Option 526 or 544 Using the Security Lock Specifications General Physical Characteristics Environmental Specifications... - Page 6 Contents Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC Connector Care Visual Inspection Connector Contacts Making Connections Cleaning Connectors Returning a V3050A SA Frequency Extender for Service Contacting Keysight Shipping your product to Keysight for service or repair...
-
Page 7: Quick Start
Keysight X-Series Signal Analyzers V3050A Frequency Extender Getting Started Guide Quick Start This section explains how to setup and initialize the Frequency Extender with the Signal Analyzer. The following topics can be found in this section: “Overview” on page 8 “Unpack, Inspect and Verify Box Contents”... -
Page 8: Overview
The V3050A Signal Analyzer Frequency Extenders provide efficient test setup and measurement accuracy needed in demanding 5G, SatCom, EW/Radar, Automotive and early 6G test environments. The V3050A uses a simple USB plug-and-play connection that can automatically configure the N9042B UXA to detect the specific mixer connected, then download calibration files. -
Page 9: Unpack, Inspect And Verify Box Contents
Inspect the shipping container and the cushioning material for signs of stress. Retain the shipping materials for future use, as you may wish to ship the instrument to another location or to Keysight Technologies for service. V3050A SA Frequency Extender Getting Started Guide... - Page 10 Quick Start Unpack, Inspect and Verify Box Contents Figure 1-3 Transit Case To access the bottom level, remove the top cushion that holds the instrument by lifting up on the corner cutouts provided. V3050A SA Frequency Extender Getting Started Guide...
-
Page 11: Standard Shipping Items
Additional Cable assy, integrated 4 cable bundle, 1 m V3050A-1RM Additional baseplate that attaches to the Frequency Extender to V3050A-2RM hold the unit upright. Additional Wrench-Torque Special Double-end 14mm-open end 4 V3050A-3RM and 10-in-lb Additional Security lock V3050A-4RM V3050A SA Frequency Extender Getting Started Guide... - Page 12 Y1900B F11 only Additional Adapter, 1.0 mm ruggedized (f) to 1.85 mm (f), DC to Y1901B 67 GHz, Option F06 only Base positioner N5290A302 Jack stand 15x15 cm V3050A-6RM Figure 1-4 Base Positioner V3050A SA Frequency Extender Getting Started Guide...
-
Page 13: Additional Tools Required
Additional Tools Required — 5/16, 8-in-lb torque wrench for instrument cable connections — 2.0 mm hex wrench for attaching the baseplate to the V3050A — 2.5 mm hex ball driver (or a 3/32 hex ball driver) for the security lock —... -
Page 14: Setup The Frequency Extender With The N9042B Signal Analyzer
2. Attach the Baseplate to the V3050A using the four screws supplied in the case. The screws go through the bottom of the base plate into the holes in the bottom of the V3050A. A 2.0 mm hex wrench (not included in the shipment) is required. - Page 15 Quick Start Setup the Frequency Extender with the N9042B Signal Analyzer 3. Starting from the bottom of the V3050A, connect the V3050-60004 cable assembly between the V3050A and the N9042B as follows. The cable assembly is clearly marked with the connections to each instrument.
- Page 16 6. Select Preset on the spectrum analyzer to see the following display. For this example the signal analyzer is the 50 GHz N9042B Option 550, and the Frequency Extender is the 50 to 110 GHz V3050A. Figure 1-9 V3050A SA Frequency Extender Getting Started Guide...
-
Page 17: Using The V3050A With An N9042A Option 526 Or 544
With Preamp and LNA enabled Using the V3050A with an N9042A Option 526 or 544 The V3050A Frequency Extender has two signal paths, and care must be taken when using it with host analyzers that have a frequency range less than 50 GHz. -
Page 18: Using The Security Lock
Frequency Extender and the analyzer RF input port must not be made. Also, the 1.85 mm termination attached to the chain on the V3050A rear panel, must be connected to the Pass Thru <50 GHz port. - Page 19 Figure 1-12 Security lock installation To use the security lock: 1. Torque the V3050A test port and the ruggedized adapter to 10-in-lb using the supplied double-ended torque wrench. 2. Fit the security lock around the connection, and tighten the security lock with a 2.5 mm hex ball driver.
-
Page 20: Specifications
30 mm H x 75 mm W x 170 mm L Environmental Specifications The V3050A SA Frequency Extender is designed for indoor use and in an area with low condensation. The table below shows the general environmental requirements for this instrument. -
Page 21: Led Definition
Quick Start LED Definition LED Definition The V3050A has two LEDs; Status and IF Out that signal the state of the V3050A Frequency Extender. See chart below for information on how to interpret the LEDs. Table 1-1 Troubleshooting procedure State... - Page 22 Quick Start LED Definition V3050A SA Frequency Extender Getting Started Guide...
-
Page 23: Safety And Maintenance Information
“Environmental and Regulatory Information” on page 27 “Connector Care” on page 30 “Returning a V3050A SA Frequency Extender for Service” on page 40 No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent electrical shock do not remove covers. -
Page 24: Esd Information
1 megohm of isolation from ground. These techniques for a static-safe workstation should not be used when working on circuitry with a voltage potential greater than 500 volts. Figure 2-1 Example of a Static-Safe Workstation V3050A SA Frequency Extender Getting Started Guide... -
Page 25: Handling Of Electronic Components And Esd
For Additional Information about ESD For more information about preventing ESD damage, contact the Electrical Over Stress/Electrostatic Discharge (EOS/ESD) Association, Inc. The ESD standards developed by this agency are sanctioned by the American National Standards Institute (ANSI). V3050A SA Frequency Extender Getting Started Guide... -
Page 26: Warnings And Cautions
Safety of any system incorporating the equipment is the responsibility of the assembler of the system. Disconnect the Keysight V3050A from USB power before cleaning. Use a dry cloth or one slightly dampened with water to clean the external case parts. -
Page 27: Environmental And Regulatory Information
The V3050A SA Frequency Extender complies with the following Electromagnetic Compatibility (EMC) compliances: EMC Compliance... -
Page 28: Regulatory Markings
South Korean Certification (KC) mark. It includes the marking’s identifier code in the format shown. The instruction documentation symbol. The product is marked with this symbol when it is necessary for the user to refer to the instruction in the documentation. V3050A SA Frequency Extender Getting Started Guide... -
Page 29: Waste Electrical And Electronic Equipment (Weee) Directive 2002/96/Ec
“Monitoring and Control Instrument” product. The affixed product label is as shown below. Do not dispose in domestic household waste. To return this unwanted instrument, contact your nearest Keysight Service Center, or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml for more information. V3050A SA Frequency Extender Getting Started Guide... -
Page 30: Connector Care
Inspect the connector contacts for integrity. It is necessary to use good lighting (such as a halogen task light) to see the contacts. Notice the location of the cross hairs in relationship to the center of the figures. V3050A SA Frequency Extender Getting Started Guide... - Page 31 Refer to the following for visual guidelines when evaluating the contact integrity of a connector. Concentricity The following examples show the concentricity of both the male and female 1.0 mm connectors: Female connector: Male Connector: V3050A SA Frequency Extender Getting Started Guide...
-
Page 32: Making Connections
Do not twist one connector into the other (like inserting a light bulb). This happens when you turn the device body, rather than the connector nut. Major damage to the center conductor and the outer conductor can occur if the device body is twisted. V3050A SA Frequency Extender Getting Started Guide... - Page 33 Figure 7 shows the torque specification for the two connection threads on the V3050A Input port connector. Two wrenches must be used to avoid stress on cables. Figure 2-2 Torque Specification for Input Port Threads V3050A SA Frequency Extender Getting Started Guide...
- Page 34 Ruggedized adapter: —1 mm to 1.00 mm Y1900B/C/D adapter This adapter can be connected to the V3050A Input port. Due to the physical requirements needed to obtain high performance, the geometry of these, as well as all, 1 mm connectors, demands special care to avoid expensive damage as explained in this document.
- Page 35 Figure 2-4 Tighten the connection just to the torque wrench "break" point as shown in . Do not tighten the connection further. V3050A SA Frequency Extender Getting Started Guide...
- Page 36 Applying Torque For the 1 mm Input Port connector, use the dual torque wrench. For matching non-ruggedized connectors using the inner threads, to the V3050A, use the 4 lb-in torque wrench. Two wrenches must be used to avoid stress on semi-rigid cables.
- Page 37 8 mm open end wrench. On the ruggedized adapter, connect the 8 mm wrench on the flats that are adjacent to the knurled ring. Figure 2-5 Wrenches Positioned on Correct Flats V3050A SA Frequency Extender Getting Started Guide...
- Page 38 Never apply in excess of 4 lb-in of torque to the V3050A Input port inner threads.
-
Page 39: Cleaning Connectors
If possible keep the connector facing down. 4. Gently wipe connecting surfaces with the end of the cleaning swab. 5. Blow dry with compressed air. 6. Inspect and repeat cleaning procedure if necessary. V3050A SA Frequency Extender Getting Started Guide... -
Page 40: Returning A V3050A Sa Frequency Extender For Service
Safety and Maintenance Information Returning a V3050A SA Frequency Extender for Service Returning a V3050A SA Frequency Extender for Service Contacting Keysight Assistance with test and measurement needs and information or finding a local Keysight office are available on the Web at: http://www.keysight.com/find/assist... - Page 41 This information is subject to change without notice. © Keysight Technologies 2021 Edition 1, May 2021 V3050-90001 www.keysight.com...