Installing The Tv On The Wall - Sony SU-WL450 Installation Information

3
Bundle the AC Adapter using
the cable holders  (supplied
with the TV). Make sure that the
label is facing outwards when
bundling AC adapter.
For KDL-48W60B/48W58B/48R48B/
40W60B/40R48B/40R45B
For KDL-32R43B/32R41B

Installing the TV on the wall

1
Connect the necessary cable(s)
to the TV.
Make sure to connect the cables before
installing the TV on the wall. You will be
unable to connect the cables when the TV
is installed.
Refer to the Reference Guide supplied with
your TV.
Note
 Subcontract the cable routing in the wall to a licensed
contractor.
 Bundle the connecting cables to prevent stepping on
them before wall mounting.
2
Install the TV onto the Base.
 For the location of the Pulleys  to the
hang on the Base, refer to the table of
step 3 in "Deciding on the installation
location" on page 8.
 Hold the TV securely with both hands
and gently hang the Pulleys  attached
to the rear of the TV to the Base, making
sure to confirm the shape of the holes.
 After installing the TV on the wall,
confirm the Pulleys  are firmly latched
into the Base.
2-a



− 10 (GB) −