Features And Benefits - Contemporary Controls BASstat BAST-321HP-BW2 User Manual

1.1 Features and Benefits

Stand-alone thermostat algorithm or fully BACnet network-controllable
•
BTL listed with B-ASC device profile for integration into BACnet networks
•
24VAC (+/-10%) power input
•
BACnet communication - BACnet/IP over Wi-Fi and can be integrated into any
•
802.11 b/g/n Wi-Fi network
Suitable for single or dual compressor heat pump control applications with manual
•
or automatic changeover
• Adjustable algorithm applied to multiple stage control (2 cooling stages- 3 heating
stages)
• Effective run time accumulation for energy consumption metering
• Configurable control parameters such as deadband, proportional gain, integral
rate and cycle time
Adjustable minimum/maximum set point ranges
•
Three options for temperature sensing:
•
o Built-in temperature sensor, or
o Remote sensor (RS) input for wiring in a remote temperature sensor
(NTC 3kΩ), or
o BACnet network temperature input
Occupancy status can be switched (1) locally by the user, (2) by using a separate
•
occupancy sensor, or (3) by using BACnet network command.
Separate adjustable occupied and unoccupied set points for heating and cooling
•
mode
Fan can be set to run continuously or automatically
•
Non-volatile memory retains user settings during power outage
•
Thermostat buttons are lockable to prevent tampering
•
°C or °F display
•
Energy Savings Input for local occupancy control
•
Control outputs disabled during "OFF" state for safety
•
UM-15094500-AA0 Page 4