LENCO DIR-170 User Manual page 20

Resume When Power On
Software Update
Reset to Default
DLNA/UPnP
You may change the default DLNA name as you like. The information below is the introduction of
how to setup media streaming from PC or other media server. Study the own instructions of the
software or apps you are using for music streaming. Make sure the music files are in the format of
MP3, WMA or AAC.
The system default setting is to resume the internet radio playback if you
were listening to internet radio or media center before switching off the unit.
If you turn this option off, the system will return to the main menu when
switching on the unit again.
If there is a software update on the server, the system will notify you. Before
starting a software upgrade, ensure that the unit is plugged into a stable
mains power connection. Disconnecting the power during a software
update may permanently damage the unit.
Restore to default settings. After the device is reset, the system will show the
language menu. Choose the desired language and press the navigate wheel(6)
20