Advertisement
Cleaning and maintenance
Always disconnect the tool from mains power before starting any cleaning work or
maintenance.
Cleaning
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean cloth or blow it down with compressed air
at low pressure. We recommend that you clean the equipment immediately after you
use it. Clean the equipment regularly with a damp cloth and some soft soap. Do not use
cleaning agents or solvents; these may be damaging to the plastic parts in the equipment.
Ensure that no water can get into the interior of the equipment. Clean the guard hood
with a brush to prevent build-up of dirt and grime.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked by a qualified
electrician.
iMPortAnt:
The carbon brushes should not be replaced by anyone but a qualified
electrician.
Servicing
There are no parts inside the equipment which require additional maintenance.
Storage
Store the equipment and accessories out of the reach of children in a dark and dry place
at above freezing temperature. The ideal storage temperature is between 5 and 30°C.
Store the electric tool in its original packaging.
replacing the power cable
If the power cable for this equipment is damaged, it must be replaced by a qualified
engineer to remain safe to use.
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in
transit. The raw materials in this packaging can be reused or recycled. The
equipment and its accessories are made of various types of material, such
as metal and plastic. Defective components must be disposed of as special
waste. Ask your local council.
technical Specification
230V ~ 50Hz
140W
1200/min
Protection Class II (The equipment does not require an earth)
AFTER SALES SUPPORT '8 0871 911 7031 Q CUSTOMERSERVICE@GARDENGEARONLINE.CO.UK
10
Advertisement
