Mounting And Operation; Starting Operation - Bosch Easy Mower 18V-32-200 Original Instructions Manual

8 | English
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).

Mounting and Operation

Action
A)
Delivery scope
Mounting the handle
Snapping together the grassbox
Fitting/removing the grassbox
Setting the height of cut
Inserting the battery
Operation
- Inserting the isolator switch
- Switching on
- Mowing
- Switching off
- Removing the isolator switch
Removing the battery
Working advice "mowing"
Blade maintenance/Blade replacement
Selecting accessories
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Starting Operation

For Your Safety
Warning! Switch off, remove the isolator switch and
u
the battery before adjusting or cleaning. The same ap-
plies when the cable to the switch in the handle is
damaged, cut or entangled.
The blade continues to rotate for a few seconds after
u
the machine is switched off.
Caution: Do not touch the rotating blade.
u
F 016 L94 201 | (17.05.2022)
Charging the Battery
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product. The battery could become
damaged.
Observe the notes for disposal of the battery.
Figure Page
A 12
Inserting/Removing the Battery
B 13
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
C 14
Insert the charged battery. Ensure the battery is inserted
14
D
correctly.
E 15
To remove the battery from the machine, press the battery
F 15
unlocking button and pull the battery out.
G − H 16 −
Charging Procedure
17
The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery is
inserted onto the charger .
Due to the intelligent charging method, the charging condi-
I 18 tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
J 18
battery temperature and voltage.
K 19
This gives longer life to the battery and always leaves it fully
L 20
charged when kept in the charger for storage.
Meaning of the Indication Elements (AL 1810)
Flashing battery charge indicator
Solid light on battery charge indicator
can therefore not be charged. The battery is charged as soon
as the allowable charging temperature range is reached.
When the battery is not inserted, a solid light on the battery
charge indicator signals that the mains plug is inserted in the
plug socket and that the charger is ready for operation.
The charging process is indicated by the flash-
ing of the battery charge indicator .
A solid light on the battery charge indicator
signals that the battery is fully charged or that
the temperature of the battery is not within the
permitted charging temperature range, and
Bosch Power Tools