Intended Use; Scope Of Delivery; Symbols - Conrad Electronic Renkforce 752181 Operating Instructions Manual

2. Intended Use

This 6-zone alarm system is ideal for securing apartments, offices and small companies.
In operation, the complete alarm system is operated by the integrated key switch. After completed assem-
bly, the basic settings can be made with the internal jumpers.
The alarm system also has two 12 V/DC outputs: One 12 V/DC output that is deactivated in case of alarm,
and one 12 V/DC output with adjustable triggering duration that is activated in case of alarm. The alarm
system also offers an external zone status LED connection, an external system status LED connection,
an external key switch connection, six alarm zones, an internal signal encoder, a sabotage contact and a
connection for a 12 V lead battery to maintain operation in case of power outage.
The operating voltage is 12 to 16 V/DC, current supply must be at least 1.5 A. An additional lead battery (we
recommend a lead battery with 12 V/DC, 1,2 Ah) can be connected to and inserted into the alarm system.
The alarm system is only suitable for indoor operation.
Any use other than described above is not permitted and may harm the product and pose risks like short
circuit, fire, etc. The entire product must not be modified or converted. The safety information in these
operating instructions must be observed at all times. Please read the operating instructions carefully and
keep them for later reference.

3. Scope of Delivery

• 6-zone alarm system
• 4x Assembly screw
• 6x 2.2 kOhm EOL resistor
• Tool for opening and closing the alarm system
• Operating instructions

4. Symbols

This symbol is used if there is any risk for your health, e.g. from electric shock.
The exclamation mark symbol indicates special danger in handling operation and control.
The "arrow" symbol indicates special advice and operating notes.
20