DIGISYSTEM RM-501 Instruction Manual
  1. Manuals
  2. Brands
  3. DIGISYSTEM Manuals
  4. Laboratory Equipment
  5. RM-501
  6. Instruction manual

DIGISYSTEM RM-501 Instruction Manual

Roller mixer
Hide thumbs
1
2

Advertisement

Table of Contents

Warnings:

* Do not remove the mixer during operation.
* Place the mixer securely away from the edge of bench to avoid the mixer falling off the bench top.
* Do not disassemble the mixer by yourself. In the event of a malfunction, the mixer should be repaired by a
qualified technician. Before repairing, turn off the power.

Steps:

1. Place the mixer on a flat and stable bench top. Connect cable with power socket and a properly
grounded outlet which corresponds with the electrical requirements on the label back on machine.
2. Put the specimen into a container and tight closed , and then place the container between 'Rollers'.
3. Place ' ON/OFF Switch' at 'ON' position, and then the power indicator is illuminated. Then the machine
starts rolling.
4. Containers can be loaded and unloaded during the machine rolling.

Maintenance and care:

Keep the machine clean all the time, so no routine maintenance is required. Cleaning can be done with a
damp cloth. Avoid the use of solvents as they may damage the machine housing.

Circuit Diagram

DIGISYSTEM LABORATORY INSTRUMENTS INC.
INSTRUCTION MANUAL FOR ROLLER MIXER
ON/OFF Switch
Power socket
Power indicator
Rollers
www.digisystemlab.com
REV.1-2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM-501 and is the answer not in the manual?

Questions and answers

Related Manuals for DIGISYSTEM RM-501

Summary of Contents for DIGISYSTEM RM-501

  • Page 1 Keep the machine clean all the time, so no routine maintenance is required. Cleaning can be done with a damp cloth. Avoid the use of solvents as they may damage the machine housing. Circuit Diagram DIGISYSTEM LABORATORY INSTRUMENTS INC. www.digisystemlab.com REV.1-2019...
  • Page 2 Plastic fixer for driven pulley is broken. Contact your distributor for repair. Plastic gear is broken. Contact your distributor for repair. The motor, plastic gears, and rollers don’t joint Contact your distributor for repair. well. DIGISYSTEM LABORATORY INSTRUMENTS INC. www.digisystemlab.com REV.1-2019...

Table of Contents