HP Pavilion 364 Quick Start Manual page 114

5 Enter the BIOS setup program during the
startup: When the blue screen with the
HP Invent logo appears, press the F1 key
on the keyboard until Entering SETUP is
displayed. (You only have a few seconds to
press the F1 key before the normal startup
process continues.) Wait until the BIOS setup
program opens.
6 Press the right arrow key to select Boot.
7 Press the down arrow key to select Boot
Device Priority, and then press Enter.
8 Change the first boot device to CD-ROM
using one of these methods:
Press the down arrow key to select the
CD-ROM item. Press the + (plus) key to
move the CD-ROM item up until it is the
first item in the list.
Or
Press the down arrow key to highlight the
First Boot Device selection. Press the +
(plus) key until CD-ROM is the selection.
86
HP Pavilion home PC
When installation is complete you'll return the
BIOS to the original setting.
9 Press the Eject button on the top CD-ROM
drive and wait for the tray to open. Insert
Recovery CD #1 and close the tray.
10 Press the F10 key to save the changes and
exit BIOS.
11 With Yes selected, press Enter.
12 The PC starts the recovery; wait for the
onscreen instructions to display, and then
follow those instructions:
For standard recovery, press R, and then
press R again. Click Next to proceed
with the non-destructive system recovery.
Click Yes to start the recovery. Insert the
remaining CDs when directed.
Or
If your PC hard disk drive is blank or
corrupted, press R to perform a full system
recovery. Insert the remaining CDs when
directed.