TA R-Net LED Operating Manual page 40

Information
Yellow symbol
Red symbol
40
Cause
The lock is engaged.
Joystick moved too soon
Automatic speed reduction
is enabled.
The electric wheelchair has
stopped automatically.
The gyro may be defective. Turn off the joystick module and
Solution
Turn off the lock.
☞ See the chapter
ing the joystick module on
page 16.
Release the joystick, turn off the
joystick module and restart it.
Set the electronic adjustment on
base position.
☞ The electric wheelchair is
drivable.
Set the electronic adjustment
on the base position, move the
drive/push mode lever into Drive
or release the parking brake.
☞ The electric wheelchair is
not drivable.
restart it.
If this doesn't fix the problem,
contact an authorised distribu-
tor.
☞ The electric wheelchair is
still drivable at a signifi-
cantly reduced speed.
Lock-