Advertisement

Quick Links

Art.nr: 95162
TA. Service A/S · Orupgade 32 B · Orup · DK-4640 Faxe
Tlf +45 56 72 57 77 · Fax +45 56 72 57 76 · www.ta-service.dk
1

Advertisement

Table of Contents
loading

Summary of Contents for TA Indoor Wave

  • Page 1 Art.nr: 95162 TA. Service A/S · Orupgade 32 B · Orup · DK-4640 Faxe Tlf +45 56 72 57 77 · Fax +45 56 72 57 76 · www.ta-service.dk...
  • Page 2: Warnings

    TA Indoor Wave is not intended for users with a weight exceeding 120 kg TA Indoor Wave should always be turned off when making entry and exit of the chair and when assisted by a helper, so that the chair does not accidentally run if the joystick is activated.
  • Page 3: Preface

    TA Services A/S hope you are satisfied with your new TA Indoor Wave. TA Indoor Wave is designed to facilitate your daily movement indoors and outdoors close to your home. It has been very important to design the chair as small and compact as possible, without reducing the chair's stability and handling.
  • Page 4: Table Of Contents

    Contents Warnings.............................. 2 Preface ..............................3 Technical Data ......................………………5 Operating Instructions .......................... 7 Before driving ..........................7 While driving ........................... After driving ............................. 8 Control box ............................8 Locking Joystick ..........................9 Setting Menu ............................10 Setting of electric functions ....................... 11 Setting the armrests.
  • Page 5: Technical Data

    Technical Data Wheelchair Type: Class A: Wheelchairs mainly intended for indoor use and are not necessarily doing outdoor hurdles. Dimensions: Width excl. seat: 56 cm Length excl. footplate / foot supports: 69.5 cm Length incl. Standard footplate: 88.5 cm Diagonal excl. Standard footplate: 90 cm Diagonal inc.
  • Page 6 It is possible to set how fast the chair's slowdown will be. If this change is wanted please contact TA Service A/S. Electromagnetic brake is activated when the chair is stationary and serves as a...
  • Page 7: Operating Instructions

    TA Indoor Wave is not intended for users with a weight exceeding 120 kg WARNING! TA Indoor Wave should be turned off when making entry and exit of the chair and when assisted by a helper, so that the chair does not accidentally run if the joystick is activated.
  • Page 8: After Driving

    After driving. Always leave the chair off and put on lowest speed. NB! Leaving the chair turned on will draw power from batteries, with reduced remaining driving distance to follow. Control box 1 Power button 2 Horn 3 Display 4 Driving Profile 5 Speed up button.
  • Page 9: Locking Joystick

    Turn on and off the chair again to make it run. Driving Profile The chair can be programmed for different driving profiles. Contact TA Service A/S for further instruction and programming WARNING! The chair is EMC tested. However, it is possible that the wheelchair can be affected by electromagnetic fields from mobile phones for example.
  • Page 10: Setting Menu

    (The display is more visible with a white background in bright sunlight) Auto = The chair can be programmed to display different backgrounds at different profiles. Contact TA Service for special adaptation. Distance - following submenu appears: Total distance: total distance power module has been running Trip distance: Trip odometer - can be reset.
  • Page 11: Setting Of Electric Functions

    Setting the power functions The wheelchair may depending on model have the following power functions: Seat lift Seat tilt Back Right legsupport Left legsupport The functions are activated by pressing the "Mode" button on the control box, then there's a picture of power features. Find the function to be used by flipping the pages of the control stick.
  • Page 12: Setting The Armrests

    Installation of the lap belt. There can be fitted lap belt on the TA Indoor Wave. TA Services A/S recommends that the lap belt is fastened either by the back mount (C) or on a bracket...
  • Page 13: Important When Driving

    This kind of slowdown should to the fullest extent be avoided on sloping surfaces and ramps. Force of obstacles. TA Indoor Wave can climb obstacles up to 5 cm, making it able to run over smaller doorsteps and the like. At very steep increases may be necessary inlet and a certain speed.
  • Page 14: Driving On Slopes

    Driving on slopes. TA Indoor Wave can clear terrain rises up to 12°. Driving on sloping surfaces should be carried out forward and at a slow pace. WARNING! Driving on slopes should be avoided because a slope to the site will give a risk that the chair can tip over.
  • Page 15: Transportation By Car

    (accessories), so it can be used as a seat in the car, bus or similar. The user can use the TA Indoor Wave during transport by car, bus or similar, if the TA Indoor Wave is equipped with TA 4-point car tiedown and/or Dahl Docking system.
  • Page 16: Charging

    Charging. TA Indoor Wave is equipped with a battery level indicator at the top of the control box - the long series of LEDs. As the chair is used the battery level falls and the LEDs turn off. See the following explanation:...
  • Page 17: Fuses

    TA Indoor Wave cannot be washed with pressure washer. Warranty. There is 2 year warranty on TA Indoor Wave. Valid from date of purchase. Any warranty repairs will be performed free of charge with regard to working hours and spare parts. The warranty period on batteries and tires supplied by TA.
  • Page 18: Troubleshooting

    See enclosed instructions for CHARGER: charger WARNING! Repairs must be performed by TA Service A/S or repairer who is authorized by TA Service A/S Only original parts or parts that are approved by TA Service A/S can be used.
  • Page 19: Declaration Of Conformity

    TA Indoor Wave is tested by Hjälpmedelinstitutet in Stockholm, and complies with standard EN 12184:2002. TA Indoor Wave is EMC tested at Delta in Them in accordance with EN 12184:2009 and ISO 7176- 21:2003. TA Indoor Wave is Climate tested at Delta in Hørsholm according to ISO 7176-09.

Table of Contents