Cleaning And Maintenance - Primo Water PR303IKP Instruction Manual

Double induction cooking plate
Table of Contents

Advertisement

Available languages

Available languages

WWW.PRIMO-ELEKTRO.BE
Power
200 - 400W
600 - 800W
1000 - 1200W
1400 - 2000W
Remove the plug from the wall socket. Do not use aggressive cleaning agents
and make sure that no water can penetrate into the appliance. To prevent
electrocution, never immerse the appliance, plug or cord in water or any other
liquid.
To prevent the dirt from sticking too strongly, we recommend that you clean
the vitroceramic surface after each use when it is still lukewarm or has just
cooled down. With a cleaning agent for vitroceramic glass, you can remove all
traces of water and lime as well as all grease splashes.
A scraper is ideal for large and stubborn stains. Hold the scraper at an angle
and loosen the dirt by rubbing the vitroceramic glass with the knife side.
Molten material such as plastic must be scraped away immediately when it is
still warm. Be careful not to burn yourself! If the hob has already cooled down,
you will need to reheat it. When it has cooled down afterwards, clean it as
described above.
Wipe off the surface with a damp cloth or use a mild, non-abrasive soap
solution.
Make sure that the bottom of the cookware does not scrape across the surface
of the ceramic field.
Make sure that the device was properly cleaned before storing it in a dry place.
Suitable for...
Slow heating of small quantities
Melting chocolate, butter, ...
Simmer slowly
Reheating
Slow cooking
Baking pancakes
Sautéing vegetables
Cooking pasta
Wok
Searing
Cooking liquids

6. CLEANING AND MAINTENANCE

45
PR303IKP

Advertisement

Table of Contents
loading

Table of Contents