Gigabyte GA-7DPXDW User Manual page 41

C UR2 Dupl ex Mode (When you set Serial Port 2 to HPSIR or ASKIR
Mode)
Set IR to Full mode.
8Full
Set IR to Half mode.(Default Value)
8Half
C Use IR Pins
8IR-Rx 2Tx 2 Enable On Board LPT port and address is 378.(Default Value)
8Rx D2,Tx D2 Enable On Board LPT port and address is 278.
C Onboard Parallel port
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
8378/IRQ7
Enable onboard LPT port and address is 278/IRQ5.
8278/IRQ5
Enable onboard LPT port and address is 3BC/IRQ7.
83BC/IRQ7
Disable onboard LPT port.
8Disabled
C Parallel Port Mode
Using Parallel port as Normal.
8Normal
Using Parallel port as Enhanced Parallel Port.
8EPP
Using Parallel port as Serial Parallel Port.(Default Value)
8SPP
Using Parallel port as Ex tended Capabilities Port.
8ECP
Using Parallel port as ECP & EPP mode.
8ECP/EPP
CEPP Mode Select
8EPP 1.7 The item sets the EPP v ersion used by the Parallel port if the Parallel port mode is
set to EPP or ECP+EPP mode.(Default Value)
8EPP 1.9 EPP Version is 1.9.
C ECP Mode Use DMA
ECP Mode Use DMA 3 (Default Value)
83
ECP Mode Use DMA 1.
81
41
BIOS Setup