Table of Contents
Advertisement
G) USB2
Ø Be careful with the polarity of the front panel
USB connector. Check the pin assignment
while you connect the front panel USB cable.
Please contact your nearest dealer for optional
front panel USB cable.
J ) WOL (Wake On LAN)
1
N ) CD_IN
CD-R
GND
CD-L
1
O ) AUX_12V( +12V Power Connector)
3
4
1
2
Hardw are Installation Process
K ) IR
1
Ø Make sure the pin 1 on the IR device is
aling with pin one the connector. To
enable the IR/CIR function on the board,
you are required to purchase an option IR/
CIR module. For detail information please
contact your autherized Giga-Byte
distributor.
To use IR function only, please connect IR
module to Pin1 to Pin5.
L ) CASE_OPEN
1
H) WOR (Wake On RING)
1
Signal
GND
Ø This connector (ATX +12V) is used only for
CPU Core Voltage.
23
Advertisement
Table of Contents
