U-Line U-ADA24RS-13B User Manual & Service Manual page 52

24" solid door refrigerator
Hide thumbs Also See for U-ADA24RS-13B:
Table of Contents

Advertisement

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
11.While pulling the evaporator cover clear of the unit, it
may be necessary to use your free hand to manipulate
the fan plug end through the pass-through hole.
12.Remove the 4 screws mounting the fan shroud to the
evaporator plate.
13.Remove and replace fan. Take special care to properly
route fan wire.
NOTICE
Fan must be oriented to pull air in through lower
evaporator cover vents and push air out at fan
mounting location.
14.Installation is the reverse of removal.
15.Use sealant gum to seal any holes in the rear of the
unit before replacing the rear cover.
16.Reinstall the unit taking care to level, center and
secure as you found it.
Air Flow
52
u-line.com
Remove Fan and Cover 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ada24rAda seriesU-ada24rb-13bU-ada24rint-00a

Table of Contents