Related Manuals for Renke RS-FS Series
Summary of Contents for Renke RS-FS Series
- Page 1 Wind speed transmitter manual (analog type) RS-FS-* Wind speed transmitter Instruction Manual (Analog Type) Document version：V2.1 Shandong Renke Control Technology Co., Ltd. www.renkeer.com...
- Page 2 Wind speed transmitter manual (analog type) Shandong Renke Control Technology Co., Ltd. www.renkeer.com...
-
Page 3: Table Of Contents
2. product model..........................5 3. Equipment installation instructions..................5 4. Calculation method......................... 7 5. Common problems and solutions....................8 6. Contact information........................ 9 7. Document history........................9 8. Dimensions..........................9 Attachment: Description of hole size for site installation......错误！未定义书签。 Shandong Renke Control Technology Co., Ltd. www.renkeer.com... -
Page 4: Product Description
10~30V DC Maximum power Current output 0.85W consumption Voltage output 1.05W Resolution 0.1m/s Transmitter circuit operating -40℃~+60℃，0%RH~80%RH temperature Measuring range 0~60m/s（default 0-30m/s） Dynamic response time ≤0.5s Precision ±0.3m/s output signal Current output 4~20mA Shandong Renke Control Technology Co., Ltd. www.renkeer.com... -
Page 5: Product Model
Adapt to the three-wire system and the four-wire system at the same time. 3.2.3: Electrical wiring Thread color Description power supply brown Power is positive black Power negative Output blue Wind speed signal is positive green Wind speed signal negative 3.3Wiring example Shandong Renke Control Technology Co., Ltd. www.renkeer.com... - Page 6 Ø6mm are opened on the circumference of Ø47.1mm, and the bolts are used to fix it tightly. The bracket keeps the whole set of instruments at the best level to ensure the accuracy of wind speed data. The flange connection is easy to use and can withstand greater pressure. Shandong Renke Control Technology Co., Ltd. www.renkeer.com...
-
Page 7: Calculation Method
The range is 0~30m/s. Take 0-10V output as an example. When the output signal is 5V, calculate the current wind speed. The span of the wind speed range is 30m/s, expressed by a 10V voltage signal, 30m/s/10V=3m/s/V, that is, every 1V change in voltage corresponds to a wind Shandong Renke Control Technology Co., Ltd. www.renkeer.com... -
Page 8: Common Problems And Solutions
3) The power supply voltage is wrong (24V power supply for 0-10V type). 4) The distance between the transmitter and the collector is too long, causing signal disturbance. 5) The PLC acquisition port is damaged. 6) The equipment is damaged. Shandong Renke Control Technology Co., Ltd. www.renkeer.com... -
Page 9: Contact Information
Wind speed transmitter manual (analog type) 6. Contact information Shandong Renke Control Technology Co., Ltd. Address: 2 / F, East Block, Building 8, Shun Tai Plaza, High-tech Zone, Jinan City, Shandong Province Post code: 250101 Phone: 400-085-5807 Website: www.renkeer.com Cloud platform address: en.0531yun.cn Or: eniot.0531yun.cn Web QR: 7. - Page 10 Wind speed transmitter manual (analog type) Shandong Renke Control Technology Co., Ltd. www.renkeer.com...
Need help?
Do you have a question about the RS-FS Series and is the answer not in the manual?
Questions and answers