Advertisement
P
P
ROJECTOR
ROGRAMMING
Set the communication settings on the projector using the IR remote included with the projector, and the
projector's on screen setup menus:
1. Press the Menu button on the remote to bring up the on-screen menu.
2. Press right (+) button once to scroll to Setup, then press enter (center of the round directional
button).
3. Press the down arrow button to scroll to operation, then press enter.
4. Press the down arrow button to scroll to Standby Mode, then press enter.
5. Press the down arrow button to select RS-232 on, then press enter.
6. Press the Escape button a few times to exit the on-screen menu.
7. Power down and restart the projector to save the changes.
3 of 5
Advertisement
