Page 4
Handling and operation of the product is permitted only for trained personnel within a work place that is access controlled. Please follow the “General Safety Instructions” supplied with the system. You find the most recent version of the “General Safety Instructions“ online in the download area of this product.
Page 7
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. NOTICE indicates a property damage message. CAUTION indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
Warning All operations on this product must be carried out by sufficiently skilled personnel only. Electric Shock! Before installing a non hot-swappable Kontron product into a system always ensure that your mains power is switched off. This also applies to the installation of piggybacks. Serious electrical shock hazards can exist during all installation, repair, and maintenance operations on this product.
Page 31
COM Express® connector CD – Pin-out Type 6 Communication 2nd GB LAN Pin out block DDR4 SODIMM Socket ena ble max 2400MHz ECC / non CH A DDR4 X8 PCIE PCIe #6-7 DDR4 PCIe#0 Controller Memory PEG #0-15 8 x1, 2 x4, Controller Intel®...
Page 35
→ → If any of the supply voltages drops below the allowed operating level longer than the specified hold-up time, all the supply voltages should be shut down and left OFF for a time long enough to allow the internal board voltages to discharge sufficiently.