Advertisement
ENGLISH
(Original instructions)
Adjusting the Air Flow
♦
This unit is equipped with a vertical tilt function,
which can be manually adjusted to better direct
the air flow.
♦
To adjust the vertical tilt angle of the fan, firmly
grip the top half of the motor housing and push it
gently upwards or downwards as required. The
fan will give off a clicking noise to indicate the tilt
mechanism is working.
♦
Once the fan has been tilted, it will automatically
remain at the selected angle until manually
adjusted again.
Note! The fan's horizontal angle cannot be manually
adjusted. To change the horizontal angle of the fan,
activate the oscillation function as detailed above,
wait until the fan is at the desired angle, then pull the
oscillation knob up to stop the oscillation function
and lock the fan into place.
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
♦
Do not immerse any part of the appliance, power
cord or plug in liquids.
♦
Use a soft damp cloth to wipe the surface. Avoid
using detergent, spray or chemicals as these may
cause damage to the appliance.
WARNING: DO NOT allow water or steam to
enter any part of the appliance, as this could cause it
to malfunction.
♦
Store the appliance in a cool, dry place, ideally in
its original packaging.
8
Mains plug replacement
WARNING: The following section on mains plug
replacement is for authorised service centre persons
only.
If a new mains plug needs to be fitted:
♦
Safely dispose of the old plug.
♦
Connect the brown lead to the live terminal in the
new plug.
♦
Connect the blue lead to the neutral terminal.
♦
If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note! If your product is class II double insulated
(only 2 wires in the cord set), no connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Any replacement fuse must be of the
same rating as the original fuse supplied with the
product.
Protecting the environment
Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials. Please recycle electrical products
and batteries according to local provisions. Further
information is available at www.2helpU.com.
Technical data
Input voltage
V AC
Frequency
Hz
Power input
W
Weight
KG
BXFD52003GB
220-240V
50
20
1.29
Advertisement
