Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RADLEY 1262-300
Summary of Contents for RADLEY 1262-300
- Page 1 1262-300 READ ALL INSTRUCTIONS BEFORE FIRST USE. READ ALL INSTRUCTIONS BEFORE FIRST USE. KEEP THIS MANUAL FOR FUTURE REFERENCE. KEEP AWAY FROM CHILDREN. 3042597 JD2585U WEAR CSA APPROVED WEAR EAR WEAR A EYE PROTECTION PROTECTION FACE MASK...
-
Page 2: Product Specifications
Sheet Sander - Owner's Manual PRODUCT SPECIFICATIONS SHEET SANDER Rating 120 V, 60 Hz AC Amperes 1.5 A Speed 13,000 OPM (no load) Sanding pad size Sheet Need Assistance? Call us on our toll free customer support line: 1-866-349-8665 (Monday through Friday 9am – 5pm Eastern Time) Technical questions •... -
Page 3: Table Of Contents
1262-300 TABLE OF CONTENTS ………….……………………………………………………………1 Product specifications ………….……………………………………………………………2 Table of contents ………….……………………………………………………………3 General safety warnings ………….……………………………………………………………3 Eye, ear & lung protection ………….…………………………………………………………….4 Electrical safety ………….……………………………………………………………4 Power tool safety ………….……………………………………………………………4 Work area safety ………….……………………………………………………………5 Personal safety ………….……………………………………………………………5-6 Power tool use and care ………….……………………………………………………………6... -
Page 4: General Safety Warnings
Sheet Sander - Owner's Manual GENERAL SAFETY WARNINGS WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. -
Page 5: Electrical Safety
1262-300 ELECTRICAL SAFETY WARNING: To avoid electrical hazards, fire hazards or damage to the tool, use proper circuit protection. This tool is wired at the factory for 120 V AC operation. It must be connected to a 120 V AC, 15 A circuit that is protected by a time-delayed fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. -
Page 6: Personal Safety
Sheet Sander - Owner's Manual PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. -
Page 7: Service
1262-300 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s... -
Page 8: Specific Safety Rules
Sheet Sander - Owner's Manual SPECIFIC SAFETY RULES WARNING: Know your sheet sander. Do not plug in the sander until you have read and understand this Instruction Manual. Learn the tool’s applications and limitations, as well as the specific potential hazards related to this tool. -
Page 9: Guidelines For Extension Cords
1262-300 GUIDELINES FOR EXTENSION CORDS Make sure your extension cord is the proper size. When using an extension cord, be sure to use one heavy enough to carry the current the tool will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. -
Page 10: Symbols
Sheet Sander - Owner's Manual SYMBOLS WARNING: Some of the following symbols may appear on the sheet sander. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. Volts Direct current Amperes... -
Page 11: Know Your Sheet Sander
1262-300 KNOW YOUR SHEET SANDER ON/OFF switch Palm grip Dust bag assembly Backing Sandpaper Cooling vents Sandpaper clamp clamping lever Sandpaper hole Sandpaper punch 1 sheet each # 60, 80, 120... -
Page 12: Assembly And Operating
Sheet Sander - Owner's Manual ASSEMBLY AND OPERATING INSTALLING THE DUST BAG ASSEMBLY Insert the dust duct bag assembly sleeve (1) into the dust chute (2) (Fig. 1). NOTE: Make sure the tabs (3) insert into the matching slots (4) in the dust chute. Rotate the dust chute sleeve CLOCKWISE Fig. -
Page 13: Punching Holes In Sandpaper
1262-300 ASSEMBLY AND OPERATING (continued) INSTALLING SANDPAPER – cont’d When the sanding pad is correctly aligned on the hole punch, press the Wrap the sandpaper sheet (3) over the sanding pad firmly onto the hole punch. backing pad (2) and insert it into the NOTE: The sharp pegs (4) in the hole open rear sandpaper clamp (5) (Fig. -
Page 14: On/Off Switch
Sheet Sander - Owner's Manual ASSEMBLY AND OPERATING (continued) WARNING: For safety reasons, the operator must read the sections of this Owner’s Manual entitled "GENERAL SAFETY WARNINGS", "POWER TOOL SAFETY", "SPECIFIC SAFETY RULES", "GUIDELINES FOR EXTENSION CORDS" and "SYMBOLS" Fig. 6 before using this ¹/ sheet sander. - Page 15 1262-300 ASSEMBLY AND OPERATING (continued) SANDING – cont’d DO NOT FORCE THE SANDER. The weight of the sander usually provides Upon completion of the sanding adequate pressure. Let the sander and the operation, turn the sander OFF by sandpaper do the work. Applying added...
-
Page 16: Maintenance
Sheet Sander - Owner's Manual MAINTENANCE GENERAL these materials it is extremely important that the tool is cleaned frequently by blowing the WARNING: When servicing, use only dust out of the tool with an air jet. identical replacement parts. Use of any other replacement parts may create a WARNING: Always wear safety goggles or hazard or cause product damage. -
Page 17: Exploded View
1262-300 EXPLODED VIEW... -
Page 18: Parts List
Sheet Sander - Owner's Manual PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the ¹/ sheet sander. Any attempt to repair or replace electrical parts on this ¹/ sheet sander may create a safety hazard unless repairs are performed by a qualified technician. -
Page 19: Warranty
RADLEY SHEET SANDER WARRANTY If this Radley Tool fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Home Hardware store with the original bill of sale for exchange. This warranty does not include expendable parts including but not limited to blades, brushes, belts, light bulbs and/or batteries. - Page 20 In a bag. keep pesky dust where it belongs. In a bag. EXCLUSIVE TO HOME HARDWARE For information on the entire line-up of Radley power tools visit homehardware.ca or your local Home Hardware retail store. MADE IN CHINA / FABRIQUÉ EN CHINE HOME HARDWARE STORES LIMITED ST.
Need help?
Do you have a question about the 1262-300 and is the answer not in the manual?
Questions and answers