Displays Error Code On The Control Screen - Decathlon ROCKRIDER E-ST500 User Manual

Displays error code on the control screen

Error code
10 / 12
Battery power low
11
Power surge protection
20
Power measurement error
21 / 23
Temperature sensor error
24 / 25
Abnormal current or power
26
Program reboot error
30
Pedestrian mode error
40 / 41
Motor power surge
42 / 43 Motor error or short circuit
44 Motor overheating
45 Error corrected during use
46 Motor not operating
Definition Solutions
Charge the battery.
Switch off and restart the bicycle.
Switch off and restart the bicycle.
Switch off and restart the bicycle.
Recharge the battery and restart the bicycle.
Recharge the battery and restart the bicycle.
Allow the motor to cool. Recharge the battery and restart
the bicycle.
Allow the motor to cool by pedalling more gently or lowe-
ring the assistance mode.
Switch off and restart the bicycle.
Allow the motor to cool by pedalling more gently or lowe-
ring the assistance mode.
Switch off and restart the bicycle.
Check that the motor connections are properly plugged
in. Restart the bike.
22