PRODUCT DESCRIPTION
Electrically-assisted bike technical features
F
Battery
A
Battery lock handle and barrel
B
Controller
C
Control screen
D
General operation of the electrical assistance
The electric-assisted bicycle can be used with or without assistance by pressing the ON/OFF button and playing
around with the 1 / 2 / 3 modes. The 1 / 2 / 3 pedal-assist modes, which you can select in the «D» screen, let you
choose a level of electrical assistance in addition to the effort provided. The electrical assistance will only work if you
pedal with the screen on and one of the 3 modes is selected. Assistance cuts out if the bike is travelling in excess of
25 km/h (+/-10%). During intensive use and in exceptional weather conditions, the pedal-assist mode may cut out to
safeguard the system. The power supplied is calculated by controller «C» according to the mode selected. Depending
on the mode selected, the controller «C» regulates the amount of current sent to the motor «G,» providing you with
the required level of assistance.
Pedal-assist mode does not activate or shuts down in the following situations:
- Your speed is above 25km/h (+/-10%)
- You're not pedalling
- The battery has insufficient remaining charge.
- When the control panel is turned off or unplugged
During intensive use and in exceptional weather conditions the pedal-assist mode may cut out to safeguard the
system
C
G
A
Cable from the control screen to the controller
E
Motor
F
Pedalling detector
G
6
D
E
B