Child Lock; Sound Off; Delay End - Samsung WF9604GQ User Manual

washing a load of laundry
START/PAUSE (
11
SELECTION BUTTON
POWER (
12
Child lock
The Child Lock function allows you to lock the buttons so that
the wash cycle you've chosen can't be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function,
press the Temp.( ) and Rinse(
for 2-3 seconds. "Child Lock
activated.
When the Child Lock function is activated, only the
Power( ) button works. The Child Lock function remains
on even after the power is turned on and off or after the
disconnecting and reconnecting the power cord.
Sound off
The Sound Off function can be selected during all courses.
When this function is selected, sound is turned off for all
courses. Even if the power is turned on and off repeatedly, the
setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function,
press the Spin(
2-3 seconds. The "Sound Off
activated.
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End( ) button repeatedly until the delay time is set.
3. Press the Start/Pause(
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power( ) button and then turn the washing
machine on again.
24_ washing a load of laundry
WF9602SQR-02776D-02_EN.indd 24
)
Press to pause and restart a cycle.
Press it once to turn your washing machine on, press it again to turn your
washing machine off.
) BUTTON
If the washing machine is left on for more than 10 minutes without any buttons
being touched, the power automatically turns off.
) buttons at the same time
" will be lit when this feature is
) and Option(
) buttons at the same time for
" will be lit when this feature is
) button. The "Delay End
2-3 SEC.
2-3 SEC.
" indicator will be lit, and the clock will
2010-11-2 15:51:09