Advertisement
TROUBLESHOOTING
PROBLEM
The ice-cream mixing bowl
can't be taken out.
The duration time is not
over, but the paddle stop
rotating.
The ice-cream mixing bowl
can't
be
put
into
ice-cream making housing.
When just starting to run,
the serious noise happens
from the paddle or the
paddle is locked.
POSSIBLE CAUSE
The water between the
ice-cream mixing bowl and
the
ice-cream
house frozen.
The ice-cream becomes
harder, the stir motor stuck.
The ice-cream mixing bowl
the
maybe deformed
The ice-cream mixing bowl
maybe deform because of
not proper using
15
SOLUTION
Wait for several mins, and then
take the mixing bowl out.
Make sure mixing bowl and the
making
base are dry before making ice
cream.
Turn off the unit, take out the
ice-cream mixing bowl and scoop
out the ice-cream. Restart the
unit, then the paddle will recover
to rotate.
Verify with the service department
and buy a new mixing bowl.
Verify with the service department
and buy a new mixing bowl.
Advertisement
