HP Compaq t5125 Administrator's Manual page 84

Frequently Asked Questions
6-4
How do you configure the date and time?
The Date and Time management GUI applet provides an easy method
for managing the date and time. You can configure the date, time,
time zone, and network time protocol (NTP). The Applet is launched
by clicking GO > Settings > Date/Time.
How do you change the boot order?
Run the BootOrder utility to alter the order of the boot up device. The
utility is installed with the standard image.
To run the BootOrder utility, perform the following steps:
1. Right click on the desktop and select Console.
2. To use the BootOrder utility, execute
/hpbootorder
.
options. To use the RepSet utility, execute
parameters) and follow the listed options.
How do you synchronize the BIOS and system
time?
To synchronize the BIOS and system time, use the
command. This command allows you to either synchronize the BIOS
time to the system time, or synchronize from system time to BIOS
time. This command without any parameters displays the current date
and time.
hwclock [-r|--show] [-s|--hctosys] [-w|--systohc]
[-l|--localtime] [-u|--utc]
Query and set the hardware clock (RTC).
www.hp.com
cd /opt/hp/
(without parameters) and follow the listed
, then type
./hprepset
(without
hwclock
Administrator's Guide