HP Compaq t5300 Supplementary Manual page 3

Installing an Altiris BootWorks Partition on an HP Compaq t5000 Thin Client with Microsoft Windows CE .NET
Creating a CE .NET
BootWorks Window
Installer Package
To create a CE .NET BootWorks Window Installer package, perform the following steps:
1. On the Altiris Deployment Server, select Boot Disk Creator.
2. When the opening selection screen appears, choose Create New
Configuration.
3. Enter a unique name for the configuration (e.g., BWORKSCE) and a description if
desired. Click OK.
4. Select BootWorks Install Package, check the button for Install to Windows
CE .NET and click Next.
5. Choose Microsoft Windows and click Next.
6. Select the VIA Rhine II Fast Ethernet Adapter Driver from the list and click
Next.
7. Choose Obtain an IP Address from a DHCP server and click Next.
8. Select Use TCP/IP to connect to Altiris Express Server and click Next.
9. Enter the domain or workgroup and account privileges to connect to the server and
click Next.
10. Select Manually Create Drive Maps.
11. Verify the UNC path to the Express share on the Altiris server is correct and click
Next.
12. Verify all the information on the last screen is correct and click Finish.
13. On the pop-up window, choose Create a Windows Installation Package.
14. Make sure the package name and path is correct. Click OK.
15. When the package is complete, click Close and exit the Boot Disk Creator.
3