Troubleshooting - LG 55SVH7F-A.AUS Owner's Manual

26

TROUBLESHOOTING

No image is displayed.
Problem
Is the product power cord connected?
Does the "Invalid Format" message
appear?
Does the "No Signal" message appear?
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
The screen flickers when the power is
turned on.
• Check if the power cord is correctly plugged into the power outlet.
• The signal from the PC (Graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range
by referring to the Specifications in this manual.
• The signal cable between PC and product is not connected. Check the
signal cable.
• Access the input menu to check the input signal.
• Check if the
graphics card user manual.
• Check if the graphics card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the "Display" settings in Control Panel. (The settings may
differ depending on your operating system.)
• The proper input signal is not connected to the signal port. Connect the
signal cable that matches with the source input signal.
• If you turn the monitor on when it is cold, the screen may flicker. This
is normal.
Action
Action
function is supported by referring to the
Action