Page 2
ORAVA electrical devices are manufactured according to state-of-the- art knowledge and recognized safety rules. Nevertheless, improper or improper use or improper use may result in injury or endangerment to the life of the user or a third party or to a third party.
Page 3
• Failure to follow the safety instructions and warnings is forbidden by the manufacturer for any damage to health or property! • Keep the instruction manual as close to the device as possible throughout its service life. Always keep the instruction manual together with the device for future use and use by new users.
Page 4
• This degree of protection is not indicated on the product and on the technical parameters in the operating instructions. • If the protection class of the product is different from IPX0, this information is then displayed on the label of the device or in the technical data of the operating instructions.
Page 5
socket. In the event of an operating fault, the device must be switched off as soon as possible and disconnected from mains supply. • The power cord and mains plug must always be easily accessible for safe disconnection of the electrical device from the power supply. •...
Page 6
1.4 Safety of persons • This device is intended for use and operation by persons without electrotechnical qualification - lay people, according to the instructions specified by the manufacturer. • Device operation includes activities such as switching on and off, user manipulation and setting of operating parameters, visual or auditory inspection of the equipment, and user cleaning and maintenance.
Page 7
1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the device in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household devices.
Page 8
2. Special safety instructions. Read carefully! • The electrical device is designed and manufactured in such a way as to allow safe operation and use by unauthorized personnel. Despite all precautions taken by the manufacturer for safe use, operation and use, there are certain residual risks and potential hazards associated with them.
Page 9
Unpacking/Packaging • Unpack the device and accessories before use and dispose of all parts of the packaging materials, etiquettes and labels. Store the packaging materials in a safe place or keep them away from children and incapacitated persons. Risk of serious injury! Risk of suffocation! Inspection/Commissioning •...
Page 10
- Do not leave the AC adapter plugged into an electrical socket when the device is not placed in the charging cradle and the battery is not charging. - Do not use the AC adapter if it has been dropped, if it shows signs of malfunction or damage, if it heats up excessively or makes abnormal noises.
Page 11
• Do not use the device for vacuuming chemical and toxic materials and particles such as: - chlorine and ammonia cleaners, bleaches, etc. • Do not use the device to vacuum easily flammable and flammable materials and their particles such as: - solid and / or liquid firelighters, petrol, thinners and the like.
Page 12
• Mechanical damage (rupture or breakage of parts and covers, damage to insulation, etc.) can cause serious injury. Do not use a damaged device. Risk of serious injury! There is a risk of damage to the equipment or other property damage! •...
Power supply Power from built-in rechargeable battery (2 x Li-ion batteries, 7.2V) The device is powered by a built-in rechargeable battery. Charge the battery before using it for the first time or whenever the battery is low (the device turns off arbitrarily or cannot be turned on). •...
Page 14
• Keep the AC adapter in use while warming up while using the device. It is normal. When the charging process is complete, they will cool down. • If the motor rotates slower (weaker) or slower. During operation, the LED will flash red, which means that the batteries can be fully charged.
Assembly and operation Before first use Unpack the device and remove all packing material. Check that the package contains all parts. Vacuum cleaner assembly 1 Pull the handle and pull out the nozzle cover (3). 2 Insert the 2 in 1 brush (2) into the suction opening in the nozzle.
Using the vacuum cleaner Before use, make sure that the vacuum cleaner is properly assembled and that the battery is charged. Do not turn on the vacuum cleaner when attaching or removing accessories. 1 Charge the vacuum cleaner according to the charging section. 2 Pull out the vacuum cleaner nozzle cover.
Page 18
After vacuuming 1 Press button 1 (on/off) on the vacuum cleaner body to switch off the vacuum cleaner. 2 If you were using a brush, remove it. Put the nozzle cover on the suction nozzle and store the vacuum cleaner in a suitable dry place at room temperature.
Page 19
2 Pull out the filter assembly and empty the contents of the cartridge. 3 Disassemble the filter assembly by turning the filter basket counterclockwise and pulling out the filter basket. Shake the filter housing itself and shake off the dirt. Parts and filter can be rinsed with water.
Cleaning and maintenance • Never wash the device under running water or immerse it in water. • Clean the device surface and accessories with a soft, dry cloth or a slightly damp cloth in water. Do not use solvents or abrasive cleaners for cleaning. •...
Technical specifications AC adapter (not supplied): 230 VAC/50 Hz input output + 5 V (DC), 2 A Battery operating voltage: 7.2 V (dc) Battery: 2 x 7.2V (2x Li-ion battery, 2 Ah) Rated power: 85 W Charging time: 2 h ± 0.5 h, when fully charged, the indicator glows steady green Operating time per charge: 10 - 15 minutes...
Page 22
Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika BATTERY DISPOSAL Before disposing of the product or handing it over to a designated collection point, you will need to ensure that the built-in batteries are removed.
Need help?
Do you have a question about the Acuvac and is the answer not in the manual?
Questions and answers