Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Orava Volcano
Summary of Contents for Orava Volcano
- Page 1 Bag vacuum cleaner Volcano Instruction manual Volcano...
- Page 2 ORAVA electrical appliances are manufactured according to current state of the engineering and recognized safety-technical rules. Nevertheless, incorrect or improper use, or use contrary to designation may result in the risk of injury or endanger the life of the user or third person, damage to the device and other material values.
- Page 3 • This appliance is intended, in addition to domestic use, for the following uses: - in shops, offices and other similar work environments; - in economic buildings; - in hotels, motels and other residential environments; - in bed and breakfast establishments. •...
- Page 4 1.3 Electrical safety • Before connecting the appliance to the power supply for the first time, make sure that the voltage on the appliance label corresponds to that of the household electrical outlet. • The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz. •...
- Page 5 • Do not bend, crush or otherwise expose the power cord of the appliance to mechanical stress or external heat sources. Damage to the power cord may result in electric shock. • When the power cord is damaged, disconnect the appliance from the mains and do not use it again.
- Page 6 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
- Page 7 2. Special Safety Instructions. Read carefully! • Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualification. Despite all measures taken by the manufacturer for safe use, handling and use, they carry with them some residual risks and associated potential hazards.
- Page 8 Check/Commissioning • Clean the machine before commissioning as described in the “ Commissioning “ or “Cleaning” section. • Never clean the device (body with electrical parts) and the power cord with the plug in a way that could cause the liquid to flow into the device. •...
- Page 9 • At temperatures of materials and substances above 40 °C (100 °F) there is a risk of fire. • Cold ash is ash cooled for a long time, which is in a state where it no longer contains particles of carbon in its interior. Such ash does not burn any more recognizable heat anymore.
- Page 10 • Take special care with your own movement when operating and positioning the appliance when vacuuming the stair / stair floor. Do not place the vacuum cleaner on the stairs and the edges of the stairs into an unstable position and above the persons on the stairs. •...
- Page 11 • Do not cover the openings of the airflow covers. Air ventilation ensures proper operation, reliable and safe operation of the device. • The device contains parts of the covers that can be heated during operation and operation. Do not touch the heated covers of the device! •...
-
Page 12: Additional Safety Warnings
Additional safety warnings If a stick, tube, or hose is stuck when vacuuming, turn off the device and remove the jamming source. Only then continue vacuuming. • Do not use near heat sources. • Disconnect the power cord by pulling on the plug. Never pull on the power cord itself. -
Page 13: Technical Specifications
Technical specifications Power supply: 220 - 240 V / 50 Hz Power input: 600 W Dimensions (W x D x H): 32 x 47 x 25 mm Weight: 5.3 kg Operating radius/cable length: 9/6 m Noise level: 68 dB (A) The declared noise emission value of this appliance is 68 dB (A), which represents the sound power level A relative to the reference sound power of 1 pW. -
Page 14: Parts Description
Parts description 1 Cover handle 2 Front cover opening locking element 3 Front cover 4 Suction port 5 Accessory compartment cover 6 Full pocket indicator 7 Power cord winding button 8 Back cover 9 Power cord 10 Wheels 11 Blowhole cover 12 ON/OFF switch 13 Suction power control... -
Page 15: Assembly And Operation
Assembly and operation Before first use Unpack the device and remove all packing material. Vacuum cleaner assembly Pred nasadzovaním alebo odoberaním príslušenstva odpojte sieťovú šnúru z elektrickej siete. 1 Attaching the flexible hose to the vacuum cleaner Insert the end of the flexible hose into the grooves of the suction opening in the vacuum cleaner and turn it clockwise until it clicks into place. - Page 16 3 Attaching the suction floor nozzle with a brush (or other accessory) to the suction tube Attach a floor nozzle (as shown below) or other nozzles to the end of the lower suction tube. Brush on the floor nozzle to push or push in on the surface to be vacuumed by pressing the foot control.
- Page 17 1 Connect the power cord to the wall socket. 2 Press the ON/OFF switch to turn on the vacuum cleaner. 3 To wind the power cord, press and hold the power cord winding button, and gently hold the power cord by hand while winding the power cord. Do not allow the cord to wind sharply.
-
Page 18: Replacing The Dust Bag
After vacuuming 1 Press the ON / OFF switch on the device to turn off the vacuum cleaner. 2 Unplug the power cord. 3 Push and hold the cord winding control (also with your foot) and wind the power cord. Hold the cord lightly with your hand when winding the power cord. -
Page 19: Filter Cleaning And Replacement
2 Remove the old bag by pulling it out. If you use a paper bag, throw the used bag in the trash. Never reuse the old bag. 3 Insert the new bag by sliding the bag frame into the bag holder so that the hole in the bag overlaps with the hole in the bag holder. - Page 20 Motor protection filter (front filter) 1 Open the front cover, remove the dirt bag. 2 Pull out the filter, clean the filter with warm water and dry it thoroughly, or replace the filter with a new one. 3 Reinstall the cleaned / new filter, insert the dirt bag, and close the cover. Exhaust Filter (HEPA) 1 Open the rear grill.
-
Page 21: Cleaning And Maintenance
Cleaning and maintenance • Unplug the power cord. Never wash the device under running water or immerse it in water. • Clean the device and accessories with a soft cloth. Do not use solvents, thinners, alcohol, or abrasive cleaners for cleaning. •... -
Page 22: Troubleshooting
Troubleshooting Problem Possible cause Recommendation The vacuum - the power cord is not - plug the plug firmly into cleaner will plugged in properly the mains socket not switch on and securely into the wall outlet - the power socket is - check the power socket damaged The suction... - Page 23 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The symbol on the product or on its packaging indicates that this product does not belong to household waste.
Need help?
Do you have a question about the Volcano and is the answer not in the manual?
Questions and answers