ORAVA electrical devices are manufactured according to the state of the art and recognized safety rules. Nevertheless, improper or improper use or improper use may result in injury or endangerment to the life of the user or a third party, or to a third party.
Page 3
• Failure to follow the safety instructions and warnings is forbidden by the manufacturer for any damage to health or property! • Make sure that the device is complete and shows no signs of damage before using the device for the first time. If the product is defective or if it has any visible damage, do not use the product.
Page 4
1.3 Electrical safety • Before connecting the device to the power supply for the first time, make sure that the voltage on the device label corresponds to that of the household electrical outlet. • The electrical device is designed for mains supply 230 V ~. The electrical safety of the device is guaranteed only if it is properly connected to the electricity grid.
Page 5
• If the electrical equipment is installed (connecting) the protective covers are dismantled, the electrical parts must not be accessible to the user when the installation is finished. 1.4 Safety of persons • This device is intended for use by persons without an electrotechnical qualification (layperson) according to the instructions specified by the manufacturer.
Page 6
2. Special safety instructions. Read carefully! • Electrical device is designed and manufactured in such a way as to allow safe operation and use by unauthorized personnel. Despite all precautions taken by the manufacturer for safe use, operation and use entails certain residual risks and the associated potential hazards.
Page 7
Unpacking/Packaging • Unpack the device and accessories before use and dispose of all parts of the packaging material, etiquettes and labels. Keep packaging materials in a safe place or keep them out of reach of children and incapacitated persons. Risk of serious injury! Risk of suffocation! Inspection/Commissioning •...
Page 8
- Do not use the AC adapter if it has been dropped, if it shows signs of malfunction or damage, if it becomes excessively hot or makes abnormal noises. - If the AC adapter is connected to the mains, the surface of the UPS may become slightly warm when the battery is being charged.
Page 9
- When picking up liquids, do not tip the device in such a way that the liquid can enter the engine and other electrical parts. - Do not exceed the amount of suction liquid, which is determined by the mark on the surface of the dirt container. - After draining the liquid, empty the device and wipe thoroughly to dry.
Page 10
Warning! • Do not use the device to vacuum textiles and clothing directly on persons! • Do not use the device to vacuum animal hair and hair directly on pets! • Do not expose yourself (body parts, face, hair, loose clothing, etc.), other people or animals to the suction line (suction line) or accessory attachments when using the device (while the device is operating).
Page 11
Do not use the device if the safety part / component is damaged or malfunctioning! • Never underestimate possible dangers and be careful!!! Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s.
Description of parts 1 cover 2 I/O switch (on/off) 3 handle 4 flex hose 5 aluminum tube 6 HEPA filter with metal screen inserted 7 rechargeable battery 8 AC adapter with power cord...
Assembly and operation Before first use: Unpack the device and remove all packing material. This ash vacuum cleaner is not only a high quality and highly reliable product, but is also easy to use and safe with a long life. It is designed to vacuum only cold ash (up to 50 °...
Page 14
Vacuum cleaner assembly Do not remove the battery before attaching or removing accessories. 1. Insert the filter Loosen the retaining clips on the top cover and remove the top assembly from the ash container. Replace the filter on the bottom of the top assembly and put the entire assembly back on the container.
Using the vacuum cleaner Turn off the vacuum cleaner before attaching or removing accessories. 1 Charge the battery according to the charging section and insert it. 2 Switch on the vacuum cleaner with the I/O switch (on/off). After switching on, vacuum the ash directly from the fireplace or stove using a suction tube.
Emptying the ash container Warning! Remove the battery before emptying. Note: When vacuuming larger amounts of ash, the container may fill up faster, so check with the filter more often. Never vacuum with a container other than the original container and the original filter.
5 Remove the filter and clean it first by tapping it, then with a lukewarm shower from the inside as shown and dry it in the air. Štetec/ NIE! Kefka 6 After thoroughly drying the filter, replace it on the bottom of the top assembly and replace the entire assembly on the container.
Battery and motor protection function The device is equipped with a battery protection function to prevent overloading and overheating and damage the batteries and the device itself. This can happen if the hole or nozzles are blocked. If the device turns itself off in the middle of operation without the battery running out, this is due to the battery and motor protection function.
Need help?
Do you have a question about the VY-235 and is the answer not in the manual?
Questions and answers