Table of Contents
Advertisement
Introduction of the BIOS
Video Off Method:
Three video off methods are available: "Blank Screen", "V/H SYNC + Blank" and "DPMS".
The default is " V/H SYNC + Blank ".
If this setting does not shut off the screen, select "Blank Screen". If your monitor and video
card support DMPS standard, select "DPMS".
Blank Screen:
This option only writes blanks to the video buffer.
V/H SYNC + Blank: This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
DPMS:
Initial display power management signaling.
Video Off After:
Select the saving mode in which the video is switched off.
NA
The video will never be switched off in no power saving mode.
Suspend
The video will only be switched off in Suspend mode.
Standby
The video will only be switched off in Standby or Suspend mode.
Doze
The video will be switched off in all power saving modes.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: N/A , 3 , 4 , 5 ,
7 , 9 , 10 , 11. The default setting is N/A.
Doze Mode:
When the setting selected for "Power Management" is "User Define", you can define for this
mode any delay from 1 minute to 1 hour. If no power management event occurs during this
time period, meaning that the computer is inactive during this period, the system will enter
the Doze power saving mode. If this mode is disabled, the system will enter the next mode in
the sequence (Standby or Suspend mode).
3-33
User's Manual
Advertisement
Table of Contents
