A1. Installation Procedure For The Exhaust; B1. Adapting The Microwave Blower For Recirculation - Samsung ME19R7041FW/AC Installation Instructions Manual

Step-by-step installation guide
A. OUTSIDE TOP EXHAUST
(VERTICAL DUCT)
A1. INSTALLATION PROCEDURE FOR THE
EXHAUST ADAPTOR AND PROPER DAMPER
OPERATION CHECK
Blower Plate
Retaining Hooks
1. Slide the exhaust adaptor as shown in the diagram
above.
2. Make sure the tape securing the damper is removed
and damper pivots easily before you mount the
microwave.
CAUTION: You will need to make adjustments to assure
proper alignment with your house exhaust duct after the
microwave is installed.
A2. ADJUST THE EXHAUST ADAPTOR
After you have installed the microwave, you will need to
open the top cabinet and adjust the exhaust adaptor so
that you can connect it to the house duct.
Damper
SMH1927_XAC_DE68-04108D-02_EN+CFR.indb 12 SMH1927_XAC_DE68-04108D-02_EN+CFR.indb 12
Damper
Exhaust Adaptor
Back of
Microwave
Oven
Back of
Microwave
Oven
For Side-toSide
Adjustment, Slide the
Exhaust Adaptor as
Needed
NOTE: You must attach the house duct to the exhaust
adaptor after installation is complete.
B. RECIRCULATING (NON-VENTED
DUCTLESS)
B1. ADAPTING THE MICROWAVE BLOWER FOR
RECIRCULATION
1. Remove and save screw that holds blower plate to
microwave.
2. Lift up the blower plate.
NOTE: The exhaust adaptor with the damper is not
needed for recirculating models. You may want to save
them for possible future use.
12
House Duct
House Duct
Blower
Retaining
Screws
Back of
Microwave Oven
2022-01-20 오전 10:26:13 2022-01-20 오전 10:26:13