Philips 4010W Series Service Manual page 29

• 3.4 Ethernet MAC address A Media Access Control
address (MAC address) is a unique identifier assigned to
network interfaces for communications on the physical
network segment.
• 3.5 Wireless MAC address Wireless Media Access
Control address.
• 3.6 BDS key for Hotel model only.
• 3.7 CI module check if CI card is insert.
• 3.8 CI+ protected service CI+ key status.
5.3 Stepwise Start-up
Standby Soft Mode
Command Received,
previously in Standby
Soft Mode (Power tact
switch)
TV Wakeup
commands
Received
(TV Wakeup
keys)
Power On
Service Modes, Error Codes, and Fault Finding
Digital
background
tasks started
Standby
commands
Received (RC
Standby key)
Standby Soft Mode
Command Received,
previously in Standby
Soft Mode (Power
TV Wakeup
tact switch)
commands
Received
(TV Wakeup
keys)
Switch On, previously
in Power On Mode
(Power tact switch)
Standby Soft Mode
Command Received,
(Power tact switch)
Figure 5-1 Stepwise Start-up
How to Navigate
By means of the "CURSOR-DOWN/UP" knob (or the scroll
wheel) on the RC-transmitter, can be navigated through the
menus.
How to Exit CSM
To exit CSM, use one of the following methods.
• Press the MENU/HOME button on the remote control
transmitter.
• Press the POWER button on the remote control
transmitter.
• Press the POWER button on the television set.
Standby
Digital
background
tasks completed
Swith On,
Semi-
previously in
Standby
Standby/Semi-
Standby (Mains
Power Plug)
Standby
Soft Mode
Command
Switch Off (Mains
Received
Power Plug)
(Power tact
switch)
Standby
Swith On,
Soft Mode
previously in
Standby Soft Mode
(Mains Power Plug)
Switch Off (Mains
Power Plug)
back to
div.table
TPM15.3HE LA 5.
Switch
Off(Mains
Power Plug)
Switch Off
(Mains Power
Plug)
Power Off
Switch On,previously in
TV Operation Mode
(Mains Power Plug)
EN 29
19080_206_110323.eps
120224
2015-Otc-09