Philips 4010W Series Service Manual page 24

EN 24 4. TPM15.3HE LA
4.5.10 LCD Panel
1. Remove the stand as described earlier
2. Remove the SSB as described earlier.
3. Remove the PSU as described earlier.
4. Remove the speakers as described earlier.
5. Remove the IR/LED board as described earlier.
6. Remove the Option board as described earlier.
7. Remove the WIFI module as described earlier.
8. Remove the Keyboard as described earlier.
9. Remove all other metal parts that do not belong to the LCD
panel.
10. Release all fixing clips that secure the front bezel to the
LCD panel.
11. Lift the LCD Panel from the front bezel.
When defective, replace the whole unit.
4.6 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position. See
Figure 4-11.
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
2015-Otc-09
Mechanical Instructions
Figure 4-1 and
back to
div.table