Canon S830D Quick Start Manual page 10

Black
Photo Cyan
Photo Magenta
Cyan
Magenta
8
3
Hold the ink tank as shown in the
diagram and remove the protective
cap.
• Do not squeeze the sides
• Do not touch the ink port.
• Do not attempt to reattach
4
Insert the yellow ink tank into the right-
hand slot. Press the top until it clicks
into place.
5
Use the same procedure to install the
other ink tanks in their appropriate
slots.
Check the labels to ensure that each tank is in the
correct position.
• Only install the ink tanks in the positions
• If ink tanks are not installed in the right
6
Close the front cover.
Yellow
Wait until the POWER lamp remains fully lit.
Notes
of the ink tanks as this
may cause the ink to leak
out and stain your clothes
and hands.
the protective cap once it
has been removed.
Notes
specified by the labels.
position, colours will not be printed
correctly. Immediately reinstall the tank in
the correct position and carry out print head
cleaning. For details, refer to the User's
Guide.
ink port