Quick Use Demonstration Of The Usbcan Function - ZLG CANDTU-100UR User Manual

CANDTU-100UR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
5.2 Quick Use of the USBCAN Function
First, connect the CANDTU-100UR to the PC with a USB cable, connect the CAN
interface of the CANDTU-100UR to another CAN device, and connect the power cable to
the CANDTU-100UR device. Run the CANtest software installed in the previous section
on the PC (as shown in Figure 5.5).
After starting CANtest, select a device type. We choose "CANDTU-100UR". The
parameter setting interface of the device is displayed (as shown in Figure 5.6).
Figure 5.4 Installation complete
Figure 5.5 CANTest test software
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
29
User Manual