Table of Contents
Advertisement
CANDTU-100UR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
4.2.8
Setting and Getting the Device Clock
Click "Set Real-Time Clock" in the device menu (or the corresponding button in the
toolbar). The dialog box shown in Figure 4.25 is displayed.
1)
Click "Set Time". The program will set it to the device based on the time combination
set in the date and time selection box selected by the calendar on the left.
2)
Click "Set device time to current time". The program will set the current system time
to the device.
3)
Click "Get Device Time". The program will obtain the RTC clock of the device via USB
and display it.
4)
Select the "Automatically obtain device time" checkbox. The program will periodically
obtain the device time and display it.
If the time setting fails, a failure message appears. Reconnect the device and try
again.
Figure 4.24 Device menu
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
24
User Manual
Advertisement
Table of Contents
