Do Configuration - ZLG CANDTU-100UR User Manual

CANDTU-100UR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
7) Record error frames

Selected: Record CAN error frames.

Deselected: CAN error frames are not recorded.
4.2.3

DO Configuration

Figure 4.11 shows the DO interface configuration items.
1) Channel enable

Selected: Enable the corresponding DO channel.

Deselected: Disable the corresponding DO channel.
2) Triggering event

Record full. Trigger output when the SD card is full;

Bus error. Trigger output when the CAN bus is faulty;

SD card is abnormal. Trigger output when SD card is abnormal or SD card does
Figure 4.10 Baud rate calculator
Figure 4.11 DO Configuration tab
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
15
User Manual