Installation - TESY IRH21RC CRL Usage And Storage Instructions

INSTRUCTION MANUAL
IRH20RC WG
Please read these instructions carefully before
using your new halogen heater
Unpack the halogen heater making sure that all the
items are present and that there are no components
left in the box and that the heater head is free from any
packing material.
Using the detailed drawing follow the steps to assemble
your halogen heater.
Do not connect the halogen heater to the electrical
supply until all the assembly is complete.
Do not connect the halogen heater to the electrical
supply if any of the components or the power cord is
damaged in any way.
If in doubt contact your supplier.
These appliances must be earthed.
Before installing or replacing the bulb, the appliance
must be always being disconnected from the 220-240V
supply.
The appliance must be disconnected from the 220-240V
supply before the lid is opened.
The appliance mist be installed exclusively in perfect
horizontal position.

INSTALLATION

Patio Heater IRH20RC WG is built with the best quality
components in accordance to the prevailing legal
regulations and certified for safety in use. For best results
from the appliance please ensure that the installation is
done by a qualified electrician in accordance with the
following instructions and taking full account of current
regulations. When using the heater, please carefully follow
the instructions and recommendations below.
English
Connection to 220-240 Volts Power Supply
•
It is important to ensure that the electricity supply is
of adequate capacity for the electrical load required
by the appliance being installed.
•
These appliances must be earthed.
Installation to Wall
When fixing the heater to a wall, ensure hinges are in
the underside so that the lid hands down in the open
position.
Minimum required distances:
•
250mm from the side wall
•
500 mm from the ceiling
•
Installation height above 1.8M
•
The heater must be fixed to a wall with the bracket
supplied to allow adequate ventilation.
•
Never fix or place heater near flammable or
combustible materials.
•
Generally heaters must be placed at a safe distance
(clear space) of at least 2.0m from combustible
materials and glass walls. If installed in workshops or
garages where inflammable or combustible paints
are used, the heaters must be installed at a distance
of at least 4.0m from the source of danger.
•
If the heaters are placed in areas where spray
painting of any description is taking place, they
should not be used during the painting operations.
•
Never use the heater in particularly dusty and
explosive areas.
ACCESSORIES
Screw socket 4 PCs
Screws M5x40 4 PCs
Wall bracket 1 pc
Metal connectors for stand 1 pc
Screw M6x10 x 4pcs
Remote control 1x pc
Spanner 1 pc
Usage and Storage Instructions
EN
7