Operation; Care And Maintenance - TESY IRH21RC CRL Usage And Storage Instructions

•
The unit must be correctly installed according to
EN
the instructions. Make sure the head is at least 1.8m
from the floor.
•
The unit must be securely placed on a horizontal
and flat surface.
•
The unit is at high temperature during operation.
It keeps hot for a period after shut down. Potential
danger would occur when touching it during this
period.
•
Don't place the unit closed to curtain and/or other
flammable objects. Otherwise there will be a danger
of catching fire.
•
Don't cover the unit with anything during operation
or a short time after it's shut down.
•
Don't wrap the power supply cord on the unit.
•
The unit must be handled with care, and avoid
vibration or hitting.
•
The unit must be securely grounded during

operation.

•
If the unit gets damaged, it must be repaired by
professional electricians.
•
When the power supply cord is damaged, it must be
replaced by authorized agent or other professional
people to avoid danger.
•
The unit must not be positioned under a socket.
•
When assembling, keep clear from any board or
flammable material.
•
The unit must be supervised by adults if it's used by
a child.
•
It is not safe to install the unit by a swimming pool,
in a bathroom or shower area.
•
The unit is for household use only. It is not safe to
use on a building site, greenhouse, barn or stable
where there's flammable dust.
•
The head of the unit is at high temperature during
operation. Unplug the unit and wait till it cools
before cleaning.
•
Don't use this unit in place where causticity or
volatile air exists, i.e. dust, steam, gas, etc.
•
Don't use this unit as a cloth drier or towel drier.
•
Don't use this unit as a sauna heater.
4
Usage and Storage Instructions
•
Don't use this unit as a room heater.
•
Don't use this unit in place of animal propagating
and raising.
•
Don't immerse this unit into water for cleaning.
•
The unit should be plugged in a socket, which is
easily visible and reachable.
•
Two Dark points may exist on the surface of the
heating elements during the first few minutes after
it is turned on. This is normal, and will not affect the
performance of the unit.
OPERATION
Connect the power cable to a 13 amp supply that is
located in a safe, dry area.
•
The switch on the heater head is used to control the
three heat setting. (I) for 1200w – (II) for 1800w –
(I&II) for 3000w.
•
Although the patio heater is shower proof, do not
use when raining or in wet conditions.
•
Always disconnect the power cable from the
electrical supply, when the patio heater is not in use.

CARE AND MAINTENANCE

•
When disconnected from the electrical supply, clean
the outside of the patio heater with a damp cloth.
Never use corrosive or solvent cleaners or immerse
in water.
•
Any maintenance or repairs including replacing
the halogen tube should only be carried out by a
qualified electrician or by a recommended service
center.