HOMCOM 820-244 Operation Instruction Manual page 21

TIMER:
3.1 Click on the timing key to enter the timing shutdown setting, the timing key icon indica-
tor lights highlight, the time content is displayed by the three-digit digital tube, the first two
digits display hours, the latter one display "h","
3.2 When timing setting, the "Add" key "Reduce" key +/-Icon light is highlighted, adjust the
time by clicking +/-key, automatically confirm after no operation 5 seconds or directly click
on timing key to confirm timing time ,(maximum setting 24 h,0h is no timing).
3.3 After the timing setting time is confirmed ,5 seconds later the digital tube position, and
then re-display the set temperature value; at the same time ," increase "key" reduce "key
/-icon lamp turn to low light.
3.4 Timing shutdown can be performed regardless of the heating mode of the machine;
3.5 When and after the timing setting, the indicator light in the middle of the timing key is
highlighted (when the timing is set to 0, that is, when the timing indicator light is low), to
see the timing remaining time, need to click the timing key again, the digital tube position
shows the timing remaining time, the "increase" key "reduce" key /- icon also turns the light
to highlight, can adjust the timing time again;
TEMPERATURE:
4.1 Point press the temperature key, activate the /- key to adjust the temperature, tempera-
ture key in the middle of the indicator light highlight, temperature content by three digital
tube display, the first two display temperature, the latter one with digital tube "point" display
"℃",
4.2 The default temperature is 24℃, set the temperature by pressing /-key, automatically
confirm after 5 seconds without operation or press the temperature key directly (tempera-
ture setting range 7-35℃);
4.3 In the on-off state, the long press temperature key is 5 seconds, the degree Celsius
mode (point c) is converted to Fahrenheit mode (point F); when the machine is in Fahren-
heit mode, the long press temperature key is 5 seconds to convert back to Celsius mode.
4.4The default temperature is 75°F, range 45-95°F.
4.5 degrees Celsius and Fahrenheit mode has memory function, after a complete power
outage can still remember the last mode.
INCREASE / DECREASE:
5.1 No temperature setting, timing setting, two corresponding indicator lights are low light,
press this key no response;
5.2 When temperature or timing is set, both keys are activated and the indicator lights are
highlighted.
5.3 Before setting the temperature, you must press the temperature key.
Dumping function:
7.1 When the angle between the dump and the horizontal position is less than 30±5
degrees, the digital tube flashes to indicate "Eo", all output is off ;(output is off in any direc-
tion of dumping)
7.2 The machine needs to be re-opened after correction, press the key to enter the work-
ing state.
EN-5