Camera Settings - Pioneer DMH-W2770NEX Operation Manual

Menu Item
[EQ]
[Super Bass] [Powerful]
[Natural] [Vocal] [Flat]
[Custom]
[Volume]
[Main Volume] [Ring
Volume] [Talking Volume]
[Navi/Voice Volume] [TA
Volume]
[Speaker Level]
Types of speaker
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer]
[Loudness]
[Off] [Low] [Mid] [High]
[Bass Boost]
[0] to [6]

Camera settings

A separately sold rear view camera is required for utilizing the rear view camera function.
(For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
TIP
The parking assist guidelines can be displayed temporarily on the rear view camera screen by touching
the icon at the top left of the screen. When you reverse the gear and display the rear view camera
screen immediately after turning on the ignition switch, it takes approximately 10 seconds to be
available for the icon. The guidelines can be adjusted. For details on how to adjust the guidelines, see
[Parking Assist Guide Adjust] (page 50).
Description
Select or customize the equalizer curve.
Select a curve that you want to use as the basis of
customizing then touch the frequency that you want to
adjust.
TIP
If you make adjustments when a curve [Super Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equalizer curve settings
will be changed to [Custom] mandatorily.
Adjust the volume level by touching [+]/[-].
Adjust the speaker output level of the listening position.
1
Touch or to adjust the selected speaker output
level.
NOTE
[Subwoofer] is available when [Subwoofer] in the [Sub/X-Over]
setting is activated.
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
Adjust the bass boost level.
- 48 -