ECS P6LX-A User Manual page 21

P6LX-A User's Manual
2: Using Your Mainboard – 2.9
LAN Wake-Up
The J40 connector on the mainboard is for connecting a signal
cable from a LAN card that supports a LAN wake-up feature.
When a LAN card that supports this is installed and connected to
the mainboard via this connector, the system will wake up from
Suspend mode when the system is accessed via the LAN.
ATX Power Supply
With an ATX power supply, the system will turn the power
off automatically when exiting Windows95.
UltraDMA Hard Disk Drive Support
This mainboard supports hard disks that use UltraDMA data
transfer. You attach an UltraDMA drive to one of the IDE cables.
If you use the Optimum Settings feature in the CMOS Setup
utility the system will automatically detect the drive and config-
ure the system to use it.
CMOS Support Battery
The disk shaped battery on the mainboard is a Lithium Ion
battery that supports the small amount of onboard memory where
the CMOS Setup utility's configuration record is stored. The bat-
tery will last for a number of years and can conceivably outlast
the usage period of the computer it is in.
If the battery fails, the system will not retain the CMOS Setup
configuration and the system will need to be reconfigured every
time you turn it on. If this happens, replace the battery with the
same type as is installed. You can get a replacement at many
electronics supply stores, computer stores and other places that
sell a variety of batteries for various uses.