Advertisement
Quick Links
Advertisement
Related Manuals for Drinkpod Onyx Series
Summary of Contents for Drinkpod Onyx Series
- Page 1 Onyx...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS 1. Keep electrical appliances out of reach from children. Do not let them to operate the appliances without supervision. 2. To protect against the risk of electrical shock, do not immerse the product, cord or plug into water or any other liquids. 3. -
Page 3: Product Description
PRODUCT DESCRIPTION 1. GENERAL OVERVIEW _______,.._@ 1 ). User Interface 8). Side Panel 2). Water Spout 9). Back panel 3). Drip Tray 10). Front panel 4). Top cover 11 ). Power cords 5). Condenser 12). Stage 1 filter Particle Chemical Scrub 6). - Page 4 Child Lock(Setting): Red and white two-color light @ Cold water big cup (Default 1 Liter) Blue/White light ® Hot water key (Default 1 Liter) :Red/White light @ Cold water key (Default one cup1 BOML)" Blue/White light @ Extra Hot+ /Reboiling key: Red/White light ®...
- Page 5 to dispense cold water and indication of cooling status. A. Push to dispense the cold water (The default volume is 180ML). the light show blue. when dispensing over Light turn back white. you can press any button to stop in advance. B.
- Page 6 You will see the blue cup blinking. You can only start by increasing the Temperature. Press the Blue Icon to increase the Press the blinking icon to Increase the Temperature To Decrease the Cold Temperature, Press the Small Coffee Cup Icon. In order to switch to the Hot temperature mode, simply press the top left lock button once.
- Page 7 DPFLT07TK DPFLT08TK...
- Page 8 5. DECSRIPTION OF NIGHT LIGHT & PROGRAM MEMORY * The night light is always on with default show blue light. * When dispensing the hot water the night light will turn red. * When dispensing cold water the night light turn blue color. * When dispensing the mix-water the night light turn red and blue both.
- Page 9 canceled only after the power off and power on again. 2) When the cooling is over {the cold water temperature reaches the setting ° temperature of 5 C), the compressor stops working, and the cooling function cannot be started within 4 minutes. After 4 minutes, If the cold water temperature reaches the cooling start temperature and the compressor starts to work.
- Page 10 For detailed instructions, see installation manual.
- Page 11 4. Filter should be cleaned for the first use.Turn on the faucet to flush the filter for 10 minutes, When installing the machine, please pay attention to the installation dimension in case for the blocking of air inlet and outlet. 10mm 5.
-
Page 12: Troubleshooting Guide
TROUBLESHOOTING GUIDE In case of failure, please carry out inspection according to the requirements below. If unresolved, please contact the local service agency. Failure&Error Code Cause Solution Low water pressure Check the tap water Small water flow Filter not replaced in time, Please contact the local service beyond the use time agency to replace the filter...
Need help?
Do you have a question about the Onyx Series and is the answer not in the manual?
Questions and answers