Table of Contents
Advertisement
Available languages
Available languages
BRAKE ADJUSTMENT
When adjusting the brake, make sure that the brake surface contacts the brake disc tightly when the handlebar is clenched to the
middle.
If you feel the brakes are not working well, you can use the brake cable tension adjusting screw to adjust the brake stroke.
This screw is located at the brake handle (see "A"). Turn the brake cable screw inward to relax it and the brake shoe will be farther
away from the rim; turn the brake cable screw outward to tighten it and the brake shoe will be closer to the brake disc.
Contact your retailer or the after-sale-service in case of need.
1.
When the braking system is too weak or too strong, use the tool to loosen the screw (C point in the picture), frap or relax
the length of cable to adjust the brake effect.
15
Advertisement
Table of Contents
