Basic Playback; Playing Back The Video - Canon VIXIA HF11 Instruction Manual

Basic Playback

Playing Back the Video

1
Set the mode dial to
2
Turn on the camcorder.
The scene index screen appears
after a few seconds.
3
Move ( , ) the selection
frame to the scene you want to
play back.
When you have recorded a large
number of scenes, press
to move between index screen
pages.
4
/
Press or
playback.
• Playback will start from the scene
selected and continue until the end
of the last scene recorded.
/
• Press again to pause the
playback.
( 26)
.
or
to begin the
• Press to stop the playback
and return to the scene index
screen.
T
O SELECT WHICH SCENES TO PLAY BACK
After creating a playlist (
switch between the original movies and
the playlist you edited according to
your choice. You can also switch
between the scenes or playlist recorded
in the built-in memory and those
recorded on the memory card.
1 In the index screen, move (
orange selection frame to the tabs
on the top of the screen.
2 Select ( ) the location of the
scenes you want to play back.
3 Return ( ) to the index screen to
select the scene.
Original movies in the built-in memory
Original movies on the memory card
Playlist in the built-in memory
Playlist on the memory card
IMPORTANT
• Observe the following precautions while
ACCESS
the indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
59), you can
) the
39